6 Tips For Cleaning Floors And Tiles
Cleaning and scrubbing the floors of our house is not the most exciting task, but you will agree that at some time of the day and the week you have to do it. Having a clean floor improves the appearance of any room. And although it sounds like a fairly simple task, you will know that there are spots that resist the mop. Today we bring you 6 tips to clean the floors and tiles faster and without much effort.
Tips for cleaning floorsand tiles
Use ammonia to clean at home
- The wax accumulated on the floor can cause it to become yellowish over time. Remove the old layers of wax and wash the floor with a mixture composed of 1 cup of ammonia and 2 liters of water. Let the solution settle for 3 to 5 minutes and then scrub the floor with a nylon or plastic scrubber to remove the old wax. Remove any residue with a cloth or sponge and then thoroughly scrub the floor.
- So that the tiles in your bathroom are clean – and remove mold that recubre- wash them with ¼ cup of ammonia diluted in 4 liters of water.
Eraser to remove stains
If your new shoes leave dark spots on the floor of your kitchen, or on the parquet, use an eraser and remove stains in less than a minute.
Steel scourer
Those black spots left by rubber soles, they just do not come out with the mop, no matter how hard you try. To remove these stains, rub the area gently with a steel wool soaked in soapy water. When the stain disappears, clean the floor with a damp sponge.
Tea for cleaning furniture and wooden floors
The fresh tea is excellent for cleaning furniture and wooden floors . Simply place a couple of tea bags in ¼ liter of boiling water and wait for it to cool. Dip a soft cloth in the tea, remove the excess, and then use it to wipe any dirt from the surface. Dry the area with a soft cloth.
Vinegar: the clean-everything par excellence
If your bathroom has lost its shine, use vinegar to restore it again. With a solution composed of ½ cup of white vinegar, ½ cup of ammonia, and ¼ cup of boric acid diluted in 4 liters of warm water. Rinse well with cold water and let air dry.
Multi-purpose oil
A new layer of polyurethane can make a wooden floor look too bright. To reduce glare, multi – purpose spray some oil on a soft cloth and clean the floor with him, quickly’ll cut this excessive glare.
Put these tips into practice and leave your floors and tiles as clean as you wish. If you are looking to thoroughly clean every corner of your home, do not hesitate to contact real professionals. Request without commitment a budget of cleaning thoroughly for your home and in just 1 day we will thoroughly clean more than 200 areas of your home to eliminate accumulated dirt.